Non-Vacuum Vents For Steam Systems

Quick, uniform distribution of heat to all radiation is the first essential to perfect performance. This requires balancing the radiation by controlled venting. Vent-Rite #1 Non-Vacuum vents are adjustable and all vents are designed for positive action and straightline venting. They function automatically to vent the air. If, through an unusual condition, the vent is filled with water, the vent port automatically closes. Vent-Rite has been supplying high quality steam and hot water air valves to home owners, public buildings, institutions and industry for over fifty years and continues to enjoy a reputation for reliability and excellence.

All Vent-Rite valves are made in the USA.




Learn more here.

Raychem Pipe Freezing Protection

Industrial pipe freeze protection systems are intended to prevent the freezing of fluids in pipes. Raychem electrical pipe freeze protection systems are designed for a variety of industrial applications and environments, including hazardous, non-hazardous, and steam cleanable.

A complete electrical heat-tracing system is much more than just the heating cable. Raychem can provide a complete system from electrical transformer and heat-trace panel to power connection, heating cable, end termination, glass tape and warning labels. We can supply the individual components, provide engineering and design and even install and maintain the entire system.

Electric heating cables are used to maintain temperature of non-flowing fluids by replacing the heat lost through thermal insulation on pipes, vessels and associated equipment.

Learn more here.

Circulator Pump Buying Guide

There are several factors to consider when purchasing a circulator pump. These include Horsepower, flow rate & head loss, material, connection method, features, and brand.

Horsepower

Horsepower or HP refers to the strength of the motor in a given pump. Horsepower is one of the most important considerations when selecting a circulator pump. A pumps' horsepower may vary from 1/40 HP for small pumps to several horsepower for large commercial pumps. Horsepower directly affects the flow rate and head loss characteristics of a pump. Only within the same brand does higher horsepower indicate a more powerful pump. When comparing pumps from different brands, you must consider both horsepower and RPMs to choose a pump with the appropriate power based on gallons per minute (GPM) and head loss of your system.

Flow Rate & Pressure Loss

The flow rate of a pump is defined as the gallons of liquid a pump can move in a minute (GPM) given a certain head loss pressure. The appropriate pump will be able to reach the required flow rate while overcoming the systems' head loss. A pump curve, which displays head loss figures on the y-axis and flow rate on the x-axis, is commonly used to find the correct pump

Material

Circulator pumps may be constructed out of cast iron, bronze or stainless steel. Cast Iron pumps, such as the Taco 007, are the most common in heating applications where oxygen-barrier PEX tubing is used. With no oxygen barrier in the tubing, bronze pumps may be required in heating applications to prevent rusting. In plumbing systems, bronze or stainless steel pumps must be used.

Connection Method

The most common way to connect a pump is with flanges. Flanges are used to make a threaded or sweat connection between a pump and the supply pipe leading to it. Common sizes of flanges are 3/4", 1", 1-1/4", and 1-1/2". Cast iron and bronze flanges are available and should be purchased to match the material of the pump being used. Recent innovations in flanges include shutoff valves and drains. These types of flanges may be purchased to ease installation, but are not required.

Pumps may also be connected using sweat or threaded connections. The pump will specify if it may be connected in this manner.

Features

Circulator pumps may come standard or with several additional features. The two most common features are an integral flow check (IFC) or variable speed. The Taco 007-IFC is an example of a pump that comes with an integral flow check. The placement of the flow check in the pump ensures that it won't be needed elsewhere in the system. A variable speed pump such as the Taco 00R-MSFIFC has the ability to operate at several different speeds. These pumps are commonly used in radiant heat systems.

Residential Fire Protection

Many of today’s cash-strapped communities recognize the safety benefits of fire sprinklers, and the cost savings that come from the conservation of precious emergency-response resources. Cities and states across the U.S. are passing legislation and ordinances requiring mandatory fire sprinklers in new home construction and often providing contractors with significant incentives to install them.

Watts Residential Fire Protection Products are UL 1821 listed and meet National Fire Protection Association requirements for fire suppression (NFPA 13D) when designed and installed by professionals who are licensed/certified for residential fire protection. All Watts brand residential fire protection products are made in the USA. As with all Watts products, Residential Fire Protection products are made from the most durable and reliable components the industry has to offer.

Learn more about this product here.

Selecting a Thermometer

When selecting a thermometer, it is important to consider the dial or case size, stem or capillary length, and the connection type and temperature range. To ensure safety and accuracy, thermometers should be selected while giving consideration to the measured media and the ambient operating conditions. Improper application may be detrimental to the thermometer, causing failure and possible personal injury or property damage.

While there are 3 basic operating types of thermometers, they being bimetal, liquid-in-glass, and Bourdon tube, the list can really be expanded to also include RTD and solar digital thermometers. All five types may appear suitable for any typical applications, however, the correct selection depends upon the industry being served and the application specified.

The following will serve as a general overview of each of these thermometers.

Bi-metal Thermometers

Bi-metal thermometers are direct sensing instruments. They are hermetically sealed and therefore, completely waterproof. All bi-metal thermometers are made of stainless steel to protect against corrosive conditions.

How they work: Two different metals with different coefficients of thermal expansion are bonded together.

As temperature changes, the unequal expansion of the two metals will cause the bimetal strip to curl, causing a displacement. This displacement is transferred from a ridged shaft to a delicate spring that drives the pointer.

Liquid-in-glass Thermometers

Also known as liquid expansion thermometers, liquid-inglass thermometers are perhaps the most popular type of thermometer. There are two types of liquid-in-glass thermometers: industrial and laboratory.

How they work: These thermometers indicate pressure by measuring expansion and contraction (i.e. as the fill liquid is heated, it expands and rises). The temperature is indicated on the vertical scale next to the fill liquid in the glass tube.

Remote Reading Thermometers

By means of a capillary tube with a sensing probe at one end and an indicating dial on the other, temperatures can be determined from a source that is up to 30’ (100m) away.

How they work: The capillary of the thermometer is filled with a gas or vapour. As temperature changes, the gas or vapour expands/contracts, creating pressure that is measured by a Bourdon tube. Some of the most common capillary fills are nitrogen (in gas thermometers) and isobutene (in vapour thermometers). Consider factors such as ambient temperature, humidity, installation, indoors or outdoors, presence of dust, corrosive atmosphere, mechanical shock, frequency and magnitude of vibration.

RTD (Resistance Temperature Detector)

When an application requires remote reading capability combined with high accuracy, a Resistance Temperature Detector (RTD) may be the best option.

How they work: RTDs work by reading the resistance charge across a metal wire that is produced from each temperature input. RTDs can be supplied with a transmitter fitted inside the RTD head to provide an industry standard 4-20mA output signal.

Solar Digital Thermometers

Digital readouts are sometimes preferred in some industrial environments. Expansion and bi-metal sensing thermometers are both available with digital readouts and solar powered.

How they work: The temperature reading is captured by a sensor that relays the data to a digital display. No additional power supply is required to power these thermometers. These thermometers require between 16 to 35 lux of illumination.

New Training Classes Are Now Available!

We are continuing to update our training class offerings. During the second half of 2011 we will be offering two new courses, diligent design & selling hydronics. Both classes are full days and are taught by Bruce Marshall. The diligent design course focuses on maximizing ROI by utilizing new concepts in heating. Energy efficiency and new technologies will be discussed. Our selling hydronic course teaches the art of the sale. We focus our attention on ways to make you more profitable in your business and give you some tips to close the deal. Come check out these and all of our available courses at our new website. You can browse all course offerings and sign-up online as well. Hope to see you soon!

http://www.emersonswan.com/resources/training.html

Why Turndown Ratio Matters

In their smallest form, devices intended to heat water or other fluids using a chemical fuel (coal, gas, oil, electricity etc.) are usually thermostatically controlled. When the desired operating pressure/temperature is attained, the thermostat turns off the heat source. When the pressure/temperature has fallen (usually to a pre-determined level), the thermostat turns the heat source on. The heat source has only two states, ie on or off. This is undesirable in all but the smallest devices as the fluctuations in pressure/temperature lead to inefficiencies in fuel combustion/consumption.

If the heat source can be made to modulate, there can be considerable savings in fuel due to combustion processes and heat/wet side temperature differences. Pressure/temperature output can remain more constant which may be of benefit.

If it is only possible to turn the output of the heat source down to (for example) 50% of its maximum. This would give a turndown ratio of two. If the heat source could be turned down to 25% of its maximum value, the turndown ratio would be four and so on.

This means that if pressure/temperature falls, the heat source is progressively turned up.

The HTP Elite boiler has a best in class 6 to 1 turndown ratio which provides the high efficiency performace that today's cunsomers want. Made in the USA, the Elite boiler is energy star rated and built with quality. The Elite boiler comes in six models ranging from 80,000 btu - 399,00 btu making it suitable for any application.