Brasscraft ProCoat Coated Gas Connectors

Utilizing advanced technologies, Brasscraft ProCoat® yellow coating has been specifically engineered to withstand prolonged exposure to common household cleaning, plumbing repair and masonry chemicals, as well as the effects of harsh environmental influences such as salt and UV rays. ProCoat gas connectors are available in a variety of configurations.

• Smooth, burnished connector ends seal with less torque, making installation easier. 
• High tensile strength stainless steel is less susceptible to work hardening. 
• Deep corrugations enhance flexibility, making installation easier. 
• May be used with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures. 
• Internal pressures up to 1/2 PSI. CSA certified for indoor and outdoor use. 
• DMA LogoDesigned, machined and assembled in the USA. 
• 100% leak tested.

The Right Connection for Large Demand Appliances
Our ultra-flexible ProCoat large diameter connectors are designed for gas appliances with large BTU requirements (up to 290,900 BTU/hour) like tankless and commercial water heaters, boilers, furnaces, and pool heaters. Factory assembled to eliminate on-site pipe cutting, threading and assembly; our connectors increase the efficiency of the installation, saving you time and money. Approved for use in manufactured housing in crossover and foundation-to-home connections.

For A Virtually “Invisible” Connection
Our black ProCoat coated gas connectors blend so well they are virtually invisible. Designed certified for heat resistance and UV exposure, our connectors are a perfect fit for a variety of decorative and heat-generating appliances, indoor and out.

Learn more about Brasscraft products on our website: http://www.emersonswan.com/manufacturers-products/brasscraft.html

Watts Radiant Onix Tubing

What makes Onix™ perfect for radiant heat and snow melting applications? Cross-linked Durel EPDM is extruded into a tube then wrapped with an AlumaShield barrier and a second layer of Durel EPDM. This composite tube is reinforced with 1000 denier aramid cord, the same incredibly tough and heat resistant material used to make fire- and bulletproof shields. A third and final outer jacket of EPDM is applied. The result is a durable, flexible tubing formed of five heat and age resistant materials, proven in tens of thousands of installations over the years.

One of the best features of our Onix tubing is its aluminum barrier layer, AlumaShield™. Unlike plastic barriers, AlumaShield is unaffected by sunlight, UV radiation from fluorescent lamps, moisture, or elevated temperatures. Due to its placement inside the tube, the AlumaShield barrier can't be scraped off or damaged by typical job site abuse.

Onix is the product that can be installed with lifelong confidence in blazing heat and sunlight, or in Arctic frost and shadows. Used for commercial snow melting, space heating, residential staple-up and supply/return lines, you'll find Onix installed in thousands of quality projects every year.

Features

1. Can stand up to normal job site conditions 
2. No special tools required 
3. Tighter bend radius allows for entry into hard to reach areas 
4. Can't be kinked 
5. Temperature range from 180°F to -30°F 
6. Resistant to UV degradation whether outside for a day or a year

Learn more about Watts Radiant on our website: http://www.emersonswan.com/manufacturers-products/watts-radiant.html

100th Anniversary Of The Modine Hot Dawg

To celebrate Modine's 100th Anniversary, we are excited to introduce a new, Special Edition Hot Dawg. Decked out in a satin black finish. It's an exciting way to customize your garage.

Modine's Hot Dawg is widely recognized as the industry's most popular residentially-certified gas-fired unit heater, with six sizes available from 30,000 - 125,000 BTUs. It is an ideal solution for residential garages and workshops, along with light commercial or industrial applications.

To commemorate Modine's 100th anniversary, the Special Edition black unit is now available, along with three appearance kits. These kits fit any new or existing Hot Dawg unit from 30,000 - 75,000 BTUs. Choose from:

1. Huntin' Dawg - perfect for sportsmen & hunters 
2. Diamond Dawg - a great compliment to any car or motorcycle enthusiasts garage 
3. Carbon Fiber - spruce up your standard Hot Dawg with this exciting option

Learn more about Modine on our website: http://www.emersonswan.com/manufacturers-products/modine.html

SuperStor Ultra Water Heater

Did you know an indirect water heater is one of the most cost effective ways to heat water? It eliminates the tremendous flue losses associated with gas-fired storage water heaters without the hassles and extra costs of tankless gas water heaters. When used with a modern, high-efficiency boiler these energy savings hold true even in the summer when your boiler isn't needed for heat!

The SuperStor Ultra is a high performance indirect water heater that can generate over 50% more hot water than many water heaters of a similar size. It has minimal heat loss, thanks to a 2" thick environmentally safe water blown foam insulation.

Use the SuperStor Ultra in conjunction with a HTP high efficiency boiler to reduce operating costs even more!

Thanks to the finned cupronickel heat exchanger, the SuperStor Ultra provides the highest BTU output per foot than any other heat exchanger in the market!

Learn more about HTP products on our website: http://www.emersonswan.com/manufacturers-products/heat-transfer-products.html