Monday, August 4, 2014

Another Opportunity For Contractors To Tap Into: Ductless Mini Splits


By Bruce Marshall, of Emerson Swan.

About a year ago I wrote an article about diversification for the oil heat dealer. Business owners continue to tell me of the different ways in which they have continued to grow their businesses. Without a doubt, the common denominator is air conditioning – one of the fastest growing market segments within the HVAC industry in the United States. And now with the increased popularity of the ductless mini- split, the opportunities for growth have increased significantly.

In the last seven years the U.S. mini-split market has seen a whopping 221 percent growth rate. And it is expected to continue to grow at a rate of 20 percent or more per year. There are many reasons for this phenomenal growth. Among them is the fact that since the introduction of the inverter-based compressor, mini-splits are more energy efficient and quieter than traditional air conditioning systems. And they are much easier to install.

They solve comfort issues where ducted solutions do not work, and there is increased awareness of the ductless option by both homeowners and contractors. For the contractor it is an incremental business with a small investment to support it.

Northeast Is Key Market
Here in the Northeast, we are ideally positioned to take advantage of this growing market. Most people think that the hottest (pun intended) market for ductless might be anywhere other than the often frigid New England states. However, contrary to what you might expect, the Northeast accounts for over 40 percent of the market, while the South owns about 22 percent of ductless sales.

Why? Think retrofit! Our housing stock is mostly old, which can be a challenge when it comes to running ductwork. The joy of ductless is that there is no ductwork, just a line set, and the largest hole that you will have to cut will be a 3-inch opening to the outside for the line set.

Ductless mini-split heat pump systems make a good retrofit add-on to houses with hydronic heat, radiant heat, or stoves using wood or pellets. They are also a good fit for room additions where extending existing ductwork is not feasible.

Apart from the convenience factor, there can be energy savings too, as traditional ducted systems usually have energy losses due to leaks in the system. In older systems, these losses can account for more than 30 percent of energy consumption, especially if the ducts are located in an unconditioned space such as an attic. Mini-splits have no ducts, therefore they do not have the losses associated with ducted central forced air systems.

Good Flexibility
Mini-split systems can be safer too, since there is only a small hole in the wall as opposed to window units or through the wall units, which can provide easy access for burglars. They are easier to install than traditional systems because the only penetration of the house is a 3 inch hole for the line sets to connect the outside unit to the inside unit. Mini-splits offer more interior design flexibility compared to other types of add-on systems. For instance, they can be hung on a wall, suspended from a ceiling, flush mounted into a drop ceiling or floor mounted.

Most indoor units look about the same and are approximately seven inches deep and have sleek, high-tech looking jackets. Many offer the option of remote control to turn the system off or on when it is positioned high on a wall.

There are numerous options in terms of equipment: single unit cool only; single unit heat pump; with or without inverter compressor; multi-head units. There are several manufacturers producing reliable and affordable systems, all of which are manufactured in Asia. In fact, it was the Japanese who developed the ductless market, which is already a huge market outside the United States. The last few years have seen the Chinese manufacturers offer a well made and competitively priced alternative to the established brands.

They Can Heat, Too
For the most part, ductless sales in the Northeast will be driven by cooling needs, but the capability to supplement existing heating systems should not be overlooked. While the passing years have seen a move away from electric heat, the fact that ductless systems are heavily supported by the utilities is evidence of their overall efficiencies. These efficiencies are the result of the inverter technology that allows the compressor to modulate its output based on load. While the traditional “window shaker” boasts a SEER of around 10, mini-splits start at 13 and go into the high 20s.

SEER stands for Seasonal Energy Efficiency Ratio, which equals the output in a typical season (btus/h) divided by the amount of electricity used during that same period (kW). Another acronym to be aware of is EER – Energy Efficiency Ratio. This represents the output versus the electrical input at any given time. And finally there is HSPF or Heating Seasonal Performance Factor, which is specific to air source heat pumps. Like SEER, it is a measurement of total btu output for the season versus the total electrical input.

Utility rebates are based on all three ratings – for cooling, read SEER and EER; for heating, read all three. It is important to remember that a particular mini-split must equal or exceed the stated utility requirements of all ratings to qualify!

Sizing
When it comes to sizing, a handy rule of thumb is to provide 20 btus of cooling for each square foot. This should be sufficient for a typical New England home, but always remember that rule of thumb is no substitute for true heat gain calculations.

Passive or net zero house designers are embracing mini-splits as their sole source for heating and cooling. This is a very feasible option when you take into account the significantly reduced loads of these buildings. Obviously, sizing for such a home would be radically different than for a typical, decades-old house.

Mini-splits offer an excellent alternative to window shakers; they are quieter and more efficient. Non inverter-based systems are less expensive than those with inverters and can be an affordable option for those on a budget.

For the contractor who is thinking of entering the ductless mini-split business, training will be an absolute necessity. Most manufacturers provide some sort of training, and manufacturers representatives such as ours at Emerson Swan, will provide comprehensive training to help the contractor develop the level of comfort necessary to create a profitable business as a part of what you already do or as a completely new, standalone enterprise.

Whatever the case, ductless mini-splits are here to stay and somebody has to install them. Why shouldn’t it be you? Learn more about our offering on our website: http://www.emersonswan.com/manufacturers-products/haier.html

Monday, July 28, 2014

Twin City Hose UL® Classified Connectors.


Twin City Hose offers a variety of UL® Classified V's, U's and Straight Flexible Connectors.

This UL® Classification demonstrates compliance with the Federal Reduction of Lead in Drinking Water Act, which revised the definition for "lead free" in the Safe Drinking Water Act.

This federally mandated act was signed into law in 2011 and came into effect January 4th, 2014. It regulates the maximum allowable contaminant level of lead with in potable water piping systems.

These products include plumbing hose and fitting assemblies that come into contact with potable water and appliances that provide water for drinking or utilize water in generating beverage or food products.

Advantages
  • 100% Tested
  • Domestically Fabricated
  • UL® tested and classified lead free products
  • All documents and certifications proving lead free products
  • Alloys covered include, stainless steel and bronze hose and braid with components/end fittings in stainless steel, carbon steel and copper

Learn more about Twin City Hose products on our website: http://www.emersonswan.com/manufacturers-products/twin-city-hose.html



Monday, July 21, 2014

Taco Raises The Bar With The Viridian VT-2218 High Efficiency ECM Circulator

With the introduction of the Viridian VT-2218, Taco has upped the ante yet again. This variable speed, high efficiency ECM circulator is the only temperature sensing circulator in its class. Using 85% less electricity than split phase motors, the Viridian VT-2218 is ideally suited for American heating systems based on its ability to monitor Delta-T, thereby maximizing system efficiency and comfort. Operating modes include Delta-T differential temperature, 4 fixed speeds, set point heat, set point cool, and boiler protection. Easy to install and program, the LCD displays mode, setting, watts, supply and return temperatures. The Viridian VT-2218 can handle a best in class 22 feet of head at 18 gpm maximum flow and is the first choice when it comes to hydronic systems zoned with zone valves, radiant loops, injection pumping, snowmelt or hydro-air fan coils. For the ultimate in distribution efficiency, the Viridian VT-2218 can be matched with up to 12 Taco Zone Sentry zone valves on one 40VA transformer.

Learn more about Taco products on our website: http://www.emersonswan.com/manufacturers-products/taco-dp.html

Tuesday, July 8, 2014

Powerflushing Your Central Heating Systems

The Fernox Powerflow Flushing Machine will add value to your business and enhance your professional image. Use it to offer a fast, professional and reliable cleaning and flushing service when replacing boilers. Many boiler manufacturers now make the warranty dependent on flushing and cleaning. The Fernox Powerflow Flushing Machine is ideal for keeping you system running like new!

The Powerflow Flushing Machine can be used at temperatures of up to 185 degrees together with Fernox DS40 System Cleaner, System Neutralizer, Powerflushing Cleaner F5 or Cleaner F3. Only one visit to the site is required to powerflush a central heating system.

Features
  • Powerflush central heating systems to remove corrosion debris, sludge and scale 
  • De-scale boilers 
  • Overcome boiler noise and circulation problems 
  • Clean a system with just ONE visit to site
  • High temperature operation to enable faster cleaning




Learn more about Fernox products on our website: http://www.emersonswan.com/manufacturers-products/fernox.html

Tuesday, July 1, 2014

The Everlast Electric Outlasts Its Competition

BUILT TO LAST LONGER. NO ANODE ROD NEEDED!

The Everlast electric water heater from HTP combines high quality stainless steel construction and energy efficient operation, providing long draws of hot water without consuming large amounts of energy. A cleverly designed water connection directs cold water to the heating element near the bottom of the tank to minimize the mixing of cold and hot water. Durable components, low standby heat losses, high recovery rates, and the industry’s strongest warranty make the Everlast Electric Water Heater an ideal choice for your electric water heating needs.

  • No Anode Rod Required: All coated tanks require anodes to delay the inevitable corrosion and tank failure. the average residential water heater lasts about 13 years. The Everlast residential stainless steel tank will outlast any coated steel tank in the market!
  • Thermostat & High Limit Controls: Adjustable temperature range up to 160º F
  • Hot Water Connections: Outlet connection on the top of the tank (with built in Heat Traps).
  • Minimal Heat-Loss: Heavy duty insulation.
  • Stainless Steel Incoloy Elements: Stainless steel screw plug increases corrosion resistance for longer element life versus conventional elements.
  • The Finest Protection: Laser welded through a concentrated heat source producing high quality, long lasting, 316L stainless steel tank construction (lightweight) - Superior corrosion resistance, eliminates the need for anode rods, protects against harsh water conditions for a lifetime of durability against leaks - Limited LifeTime Warranty (with online registration).



Saturday, June 14, 2014

Hydronic Expansion Tanks With 100% Butyl Diaphragms


The HTX Series: Constructed of deep drawn welded steel domes, HTX tanks by Flexcon Industries feature butyl diaphragms engineered for longer life. Butyl rubber is the material of choice for American heating systems as it offers low permeability rates at higher temperatures. Our oversized diaphragm maximizes tank drawdown, and minimizes wear. This design virtually eliminates diaphragm stretch, which enhances longevity.

Specifications: The in-line HTX Series are available from 2 to 15 gallons and utilize a welded system connection with built-in hex nut for easy installation.The brass shrader valve has an o-ring seal to ensure air side integrity. An appliance quality finish means many years of service in damp basements and crawl spaces. The SXHT Series are freestanding, and range in size from 15 to 81 gallons.

Testing: Every Flexcon Hydronic tank is pressure tested and backed with a five year written, limited warranty. Packages Combination: Packages include a tank, air scoop and vent for added installer convenience. Flexcon also offers a line of hydronic accessory items that include the re-designed Fill-Rite 300 FV pressure regulating valve.

Learn more about Flexcon products on our website: http://www.emersonswan.com/manufacturers-products/flexcon.html

Monday, June 9, 2014

Tempera Valves by Precision Plumbing Products


The Tempera Valves, by Precision Plumbing Products (PPP), is a highly sensitive pressure balancing valve that holds a selected water temperature to within one degree. It responds instantly to all line pressure loss on either the hot or cold side.

Tempera Valves may be installed in any position or at any angle. They must be installed ahead of the control valve(s). The flow pattern is indicated by arrows imprinted in the valve body.

Features
  • Automatic pressure compensating, preventing thermal shock
  • Can be used with single or tow handle mixing valve assemblies
  • Holds a selected water temperature to within +- 3º F degree regardless of pressure change 
  • Fully ported valve with minimal pressure drop 
  • Safe and positive because it is a pressure balancing valve, not a thermostatic mixing valve 
  • Meets A.S.S.E. STANDARD 1066 individual in-line pressure balancing valves

Tempera Valves should be provided with some type of access for servicing if necessary. Avoid high temperaturesin direct contact with the valve body.

The internal parts of theTempera Valve are stainless steel with only one moving part. The pressure differential sensing piston is constantly responding to any system pressure changes.

Learn more about Precision Plumbing Products on our website: http://www.emersonswan.com/manufacturers-products/ppp.html