Monday, December 15, 2014

Hot Water Temperature Maintenance

Large commercial buildings need a way to provide hot water at the tap in the most energy efficient way, without long waits or wasting water. Pentair Thermal Management has a sophisticated domestic hot water temperature maintenance (HWAT) system that provides immediate hot water at the tap that is a nice alternative to a recirculation system.

Whereas, a recirculation system:
  • Requires that you keep the water heater temperature in the system at least five degrees above the maintain temperature to compensate for the heat that is lost in the recirculation loop. 
  • Requires return lines, pumps, and balancing valves as part of the system. 

Pentair Thermal Management hot water temperature maintenance (HWAT) system provides a simple, reliable alternative to recirculation in commercial buildings. The HWAT system:
  • Maintains the water at a uniform temperature along the entire length of the supply pipe. Thus, it is unnecessary to heat the water above the maintain temperature. 
  • Includes HWAT heat trace cables that can be installed up to the fixture, which mean that you get hot water faster and waste less water.

HWAT is a fully integrated system that includes:

  • Electric heat trace cables – the HWAT-Y2 and HWAT-R2 heat trace cables adjust their power output along the entire length of the pipe to compensate for variations in water temperature and ambient temperature. These cables are designed for installation on hot water supply pipes underneath standard pipe insulation. 
  • Connection kits and accessories – items for making electrical connections and properly completing the installation, such as power connection and end seal kits. 
  • Advanced control systems – electronic controllers that monitor and/or control the desired temperature maintenance of the pipes. 

The HWAT-ECO and ACCS-30 electronic temperature controllers optimize the energy efficiency of the HWAT system by controlling the pipe temperature with either HWAT heat trace cable. The temperature set point can be programmed on a 24/7 schedule to suit the specific job requirements, providing the maximum water temperature control and energy savings to the end user.

Learn more about Pentair Thermal Management on our website: http://www.emersonswan.com/manufacturers-products/raychem.html

Monday, December 8, 2014

The Benefits Of Geothermal


Geothermal technology harnesses the Earth’s renewable thermal energy stored just below the surface or in large bodies of water for the purposes of providing forced air heating and cooling, hot and chilled water and dehumidification. The system exchanges the natural heating and cooling properties of the Earth between a building and the ground. This transfer of energy is the source of enhanced performance and environmental superiority as Geothermal systems employ a small amount of electrical energy to capture, move and concentrate a large amount of “free energy” provided by the Earth. The result is the utmost in space conditioning.

Ground source heat pumps are the most commonly applied geothermal system today for both residential and commercial applications. They take the natural heating and cooling properties of the Earth to create "free energy" for a given space. The beautiful thing for end users is that only a small amount of electrical energy is needed to capture, move and concentrate this energy.

Learn more about Geothermal products on our website: http://www.emersonswan.com/manufacturers-products/modine.html

Monday, December 1, 2014

Heat-Gard Non-Electric Radiator Thermostats Keep a Heating System Comfort Balanced


Non-electric thermostats have been successfully used throughout the world for years. They're proven to be the most simple, reliable way to prevent energy waste and reduce heating costs. At the same time, they ensure individual room comfort. They sense changes in temperature and automatically increase the flow of heat in response to a temperature drop or automatically decrease it in response to temperature rise.

Short Payback Time
Because Heat-Gard is non-electric, it is relatively inexpensive to install and operate. A low cost Heat-Gard on every radiator is the most reliable way to update an old heat guzzling system economically.

Easy To Service
The Heat-Gard valve is made so the complete cartridge can be replaced without draining the system, by use of a special inline cartridge changer. This is a great advantage for hospitals, schools and nursing homes where disruptions of a heating system can be tremendous problems. For large public building and schools, there is even a vandal resistant Heat-Gard to prevent unwarranted tampering with the heat settings.

Backed By Taco's Hydronic Experience
As with all Taco products, Heat-Gard is pretested at the factory before it ships. Their exacting quality standards have given all their products a reputation for dependability and top performance.

Download the Heat-Gard brochure here.
Learn more about this and other Taco products on our website: http://www.emersonswan.com/manufacturers-products/taco-dp.html



Monday, November 24, 2014

Join The Future With Watts TRITON Pipe Fusion

The revolutionary TRITON system is the first application of radio frequency (RF) electromagnetic technology, a trusted method of welding used in industrial applications, for plastic piping.

This new welding technique has many advantages over conventional pipe joining processes:
  • TRITON enables pipe joining and pressure testing in minutes (instead of hours) 
  • TRITON welds can be completed by one person, reducing required manpower 
  • TRITON creates a safer work environment—no exposed heating elements, no adhesives with VOCs, no exposed flame 
  • TRITON outside diameter welds offer unobstructed flow and decreased pressure drop, reducing overall system cost 
  • TRITON is ready to use in minutes—no waiting for exposed heating elements to heat up 
  • TRITON uses less energy than conventional pipe joining technology

The TRITON Pipe Fusion system includes three components: a Control Unit, Fusers, and Fittings. (Both Fusers and Fittings are sold separately). The TRITON components are designed to work together to create lasting hermetic welds in minutes without the use of adhesives, open flame, or heating elements.


The TRITON Series TRCU-M1 Control Unit is designed to operate on a standard 110/120 VAC circuit. The Control Unit converts the AC power to DC power, and then generates a radio frequency (RF) signal. The RF signal is transferred to the Series TRFWP1 Fuser to complete the welding process.

The self-contained and self-calibrating Control Unit comes with a 10’ long GFCI-protected power cord and a 20’ long coaxial Fuser cable. The power draw for each weld is less than 100 watts. (Only Watts supplied cords should be used with the TRITON Control Unit).


The TRITON Series TRFWP1 Fusers are designed to concentrate a radio frequency (RF) signal and direct it onto a TRITON Fitting. This in turn generates heat which fuses the Fitting and pipe together.

The TRITON TRFWP1 Fusers are currently available in five sizes (to standard ASTM D3035)


TRITON Fittings are uniquely engineered: 
  • Unique design increases strength & rigidity 
  • Lightweight form factor 
  • Full range of sizes and configurations


Learn more about Watts TRITON on our website: http://www.emersonswan.com/manufacturers-products/watts-triton.html

Sunday, November 16, 2014

Duravit Rimless: Efficient Flushing. Optimum Hygiene.

This rimless wall-mounted toilet with innovative and effective flushing technology offers an efficient solution: the water is delivered to the bowl forcefully and systematically, ensuring that the entire inner surface is rinsed throughout the flushing process. The dynamic water flow provides outstanding flushing results while preventing splashing. As a modern wall-mounted toilet of the 1.6 / 1.28 gpf generation, DuraStyle rimless even saves water.

Thanks to its open and easily accessible rim area, it is also considerably easier to keep the bowl clean. The DuraStyle rimless is also optionally available with the WonderGliss coating. This makes it even simpler to keep the entire inside of the toilet clean.

With its timelessly modern form, DuraStyle's design is equally impressive. The wall-mounted toilet made entirely of sanitary ceramic with a 21 1/4" projection boasts an extra-flat seat that is optionally available with the SoftClose feature. It is also available in an elongated version with a 24 3/8" projection and concealed fastening. This model can also be combined with the Sensowash shower-toilet seat.



Learn more about Duravit products on our website: http://www.emersonswan.com/manufacturers-products/duravit.html

Monday, November 10, 2014

The Easiest, Most Affordable Outdoor Reset

The Taco FuelMizer is a boiler reset control and switching relay in one unit; it is ideal for retrofit application, but may also be used in new installations as well. The FuelMizer can potentially save homeowners between 5-30% on their heating costs.

The FuelMizer™ (SR501-OR) is a microprocessor-based control designed to regulate the supply water temperature of a single boiler, based on the outdoor temperature. The FuelMizer is a boiler reset control and switching relay in one unit; it is ideal for retrofit application, but may also be used in new installations as well.

Features:

  • Ideal retrofit outdoor reset control for existing oil and gas boilers as well as new installs( except maintaining boiler with tankless coil)
  • Easily added to both zone valve and circulator systems
  • True weather regulated reset at an affordable price
  • Preset reset ratio allows set up at the turn of a dial with outdoor design temp range of -30° to 40° F
  • DHW override of outdoor reset built in
  • Control includes both outdoor and supply pipe sensors
  • LED lights on front of unit for easy diagnostics
  • Boiler minimum DIP switch options of 70° or 140° F
  • Warm Weather Shutdown DIP switch options of Off or 70° F
  • Differential DIP switch options of 10° or 20° F



Learn more about Taco products on our website: http://www.emersonswan.com/manufacturers-products/taco-dp.html

Monday, November 3, 2014

Fernox: Born To Lead, Not Follow


Since its establishment in 1964, Fernox has been leading the water treatment market. It was Fernox Founder Peter Muetzel who first recognized the fundamental role chemical water treatment has in maintaining the energy efficiency of a central heating system and extending its lifespan.

For 50 years, Fernox’s focus has been on research and development, and the company’s success lies in its pioneering spirit. With an on-going commitment to innovation, Fernox has grown to become a global leader in chemical water treatments, system filters as well as diagnostic testing and analysis services.

Key innovations include the company’s trusted ‘F’ range of chemical water treatments that comprises of Protector F1, boiler noise silencer F2, cleaner F3 and leak sealer F4. The products are available in a 500 ml or an express aerosol format, which allows dosage to be completed in mere seconds – quickly, efficiently and without the need to drain down the system.

The most effective means of cleaning a heavily sludged central heating system is by power flushing. Fernox designed the 110v Powerflow Flushing Machine MKIII to enable installers to remove corrosion debris, sludge and scale from a system with just one visit to the site.

The company’s ability to innovate also led to the development of the award-winning Fernox TF1 Total Filter, which removes both magnetic and nonmagnetic contaminants from central heating systems, providing a “belt and braces” approach to boiler protection. Fernox is prolific in its approach to new product development – responding to changes in legislation, technology and installer feedback to regularly update its offering. Moreover, alongside its comprehensive product development program Fernox tirelessly champions best practices and the importance of training – taking the lead on informing the market of legislative changes and offering best practice technical advice.

For more information on Fernox products, please visit our website: http://www.emersonswan.com/manufacturers-products/fernox.html