Brasscraft ProCoat Coated Gas Connectors

Utilizing advanced technologies, Brasscraft ProCoat® yellow coating has been specifically engineered to withstand prolonged exposure to common household cleaning, plumbing repair and masonry chemicals, as well as the effects of harsh environmental influences such as salt and UV rays. ProCoat gas connectors are available in a variety of configurations.

• Smooth, burnished connector ends seal with less torque, making installation easier. 
• High tensile strength stainless steel is less susceptible to work hardening. 
• Deep corrugations enhance flexibility, making installation easier. 
• May be used with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures. 
• Internal pressures up to 1/2 PSI. CSA certified for indoor and outdoor use. 
• DMA LogoDesigned, machined and assembled in the USA. 
• 100% leak tested.

The Right Connection for Large Demand Appliances
Our ultra-flexible ProCoat large diameter connectors are designed for gas appliances with large BTU requirements (up to 290,900 BTU/hour) like tankless and commercial water heaters, boilers, furnaces, and pool heaters. Factory assembled to eliminate on-site pipe cutting, threading and assembly; our connectors increase the efficiency of the installation, saving you time and money. Approved for use in manufactured housing in crossover and foundation-to-home connections.

For A Virtually “Invisible” Connection
Our black ProCoat coated gas connectors blend so well they are virtually invisible. Designed certified for heat resistance and UV exposure, our connectors are a perfect fit for a variety of decorative and heat-generating appliances, indoor and out.

Learn more about Brasscraft products on our website: http://www.emersonswan.com/manufacturers-products/brasscraft.html

Watts Radiant Onix Tubing

What makes Onix™ perfect for radiant heat and snow melting applications? Cross-linked Durel EPDM is extruded into a tube then wrapped with an AlumaShield barrier and a second layer of Durel EPDM. This composite tube is reinforced with 1000 denier aramid cord, the same incredibly tough and heat resistant material used to make fire- and bulletproof shields. A third and final outer jacket of EPDM is applied. The result is a durable, flexible tubing formed of five heat and age resistant materials, proven in tens of thousands of installations over the years.

One of the best features of our Onix tubing is its aluminum barrier layer, AlumaShield™. Unlike plastic barriers, AlumaShield is unaffected by sunlight, UV radiation from fluorescent lamps, moisture, or elevated temperatures. Due to its placement inside the tube, the AlumaShield barrier can't be scraped off or damaged by typical job site abuse.

Onix is the product that can be installed with lifelong confidence in blazing heat and sunlight, or in Arctic frost and shadows. Used for commercial snow melting, space heating, residential staple-up and supply/return lines, you'll find Onix installed in thousands of quality projects every year.

Features

1. Can stand up to normal job site conditions 
2. No special tools required 
3. Tighter bend radius allows for entry into hard to reach areas 
4. Can't be kinked 
5. Temperature range from 180°F to -30°F 
6. Resistant to UV degradation whether outside for a day or a year

Learn more about Watts Radiant on our website: http://www.emersonswan.com/manufacturers-products/watts-radiant.html

100th Anniversary Of The Modine Hot Dawg

To celebrate Modine's 100th Anniversary, we are excited to introduce a new, Special Edition Hot Dawg. Decked out in a satin black finish. It's an exciting way to customize your garage.

Modine's Hot Dawg is widely recognized as the industry's most popular residentially-certified gas-fired unit heater, with six sizes available from 30,000 - 125,000 BTUs. It is an ideal solution for residential garages and workshops, along with light commercial or industrial applications.

To commemorate Modine's 100th anniversary, the Special Edition black unit is now available, along with three appearance kits. These kits fit any new or existing Hot Dawg unit from 30,000 - 75,000 BTUs. Choose from:

1. Huntin' Dawg - perfect for sportsmen & hunters 
2. Diamond Dawg - a great compliment to any car or motorcycle enthusiasts garage 
3. Carbon Fiber - spruce up your standard Hot Dawg with this exciting option

Learn more about Modine on our website: http://www.emersonswan.com/manufacturers-products/modine.html

SuperStor Ultra Water Heater

Did you know an indirect water heater is one of the most cost effective ways to heat water? It eliminates the tremendous flue losses associated with gas-fired storage water heaters without the hassles and extra costs of tankless gas water heaters. When used with a modern, high-efficiency boiler these energy savings hold true even in the summer when your boiler isn't needed for heat!

The SuperStor Ultra is a high performance indirect water heater that can generate over 50% more hot water than many water heaters of a similar size. It has minimal heat loss, thanks to a 2" thick environmentally safe water blown foam insulation.

Use the SuperStor Ultra in conjunction with a HTP high efficiency boiler to reduce operating costs even more!

Thanks to the finned cupronickel heat exchanger, the SuperStor Ultra provides the highest BTU output per foot than any other heat exchanger in the market!

Learn more about HTP products on our website: http://www.emersonswan.com/manufacturers-products/heat-transfer-products.html

Maximize Your Systems Potential With Silent Fin Heating Edge

Condensing boilers, Ground Source Heat Pumps and Solar Thermal Collectors are all great ways to save energy and reduce fossil fuel usage. All three achieve their highest efficiency when delivering low temperature water but generally have higher upfront costs than their less efficient counterparts. While each technology has inherent features and benefits, each is also judged on its ability to provide a return on investment. Whether for commercial or residential use, it is imperative that careful attention be paid to the application of the equipment and the distribution system being utilized by these technologies.

The challenge faced when it comes to heating effectively with traditional baseboard is that supply water temperatures need to be at least 140˚F in order to deliver enough BTUH’s to sufficiently heat a space at design temperature. Not so with the Smith's Silent Fin Heating Edge High Capacity Coil Block. Due to its unique embossed fin design, it is able to deliver comparable BTUH’s using 100˚ - 120˚F supply water, all in an attractive package.

Silent Fin Heating Edge, by Smith's Environmental Products, allows these technologies to perform to their optimum efficiency and provide their respective returns on the initial investment. In other words, Heating Edge helps to make that ROI possible.

Features

• Quiet delivery of heat 
• Attractive design 
• Superior low temperature performance 
• Perfect for use with solar thermal, geothermal or condensing boilers 
• Single pipe design 
• Suitable for residential or commercial applications

Learn more about Smith's Silent Fin Heating Edge: http://SmithsEP.com/products/he3-silent-fin-heating-edge-baseboard/

What Is A Heat Recovery Ventilator?

A Heat Recover Ventilator (HRV) is integrated into the duct work in a home, usually located near the furnace. The HRV expels stale indoor air to the outside, and draws in fresh air from outside to be distributed throughout the home.

1. Warm stale air from your home is drawn into the HRV. 
2. Heat from the indoor air is transferred via the unit's aluminum core to the fresh air stream. 
3. Stale air is expelled outside, leaving its warmth behind in the HRV's aluminum core. 
4. Cool fresh air is drawn into the HRV, and warmed by the heated aluminum core. 
5. Your entire home is filled with warm, clean, fresh air. 

The air streams pass on either side of Lifebreath’s exclusive and patented aluminum core, never mixing. In the summer, the HRV works in reverse. Warm air is expelled and cool air is delivered throughout the home.

Learn more about Lifebreath products on our website: http://www.emersonswan.com/manufacturers-products/lifebreath.html

Taco Press Connection Air Separators

Taco is now offering press connections for the 4900 Series air separator in 3/4", 1", and 1-1/4" connection sizes.

Press connections offer quicker installation and improved job site safety due to flame-free installation. The Taco 4900 Series air separators are designed for the complete elimination of air from closed loop heating and cooling systems, up to a maximum temperature of 240° F and a maximum pressure of 150 psi. The presence of air in these systems can lead to many problems, including irritating noises, reduced efficiency, and internal corrosion of essential parts such as the boiler and radiators.

Model Numbers

• 49-075P
• 49-100P
• 49-125P

To learn more about Taco products, please visit our website: http://www.emersonswan.com/manufacturers-products/taco-dp.html